Introduction
Are your doors constantly slamming shut because of a draft? Do you need to prop them open for ventilation but don’t have anything on hand? Don’t worry, we’ve got you covered! In this article, we’ll show you how to make your own DIY door stoppers that are not only functional but also budget-friendly. Say goodbye to pesky drafts and hello to stylish and practical door stoppers in just a few easy steps. Let’s get started!
Materials Needed
When it comes to making your own door stoppers, you don’t need a lot of fancy materials. In fact, most of the things you’ll need can probably be found around your house! Here are some common materials that you might want to consider using:
1. Bricks or Stones – Heavy objects like bricks or stones make great door stoppers because they’re sturdy and won’t move easily.
2. Fabric Scraps – Old clothes or linens that would otherwise end up in the trash bin can be repurposed as door stoppers by filling them with sand or rice.
3. Rubber Stoppers – If you have old rubber jar openers lying around, put them to good use as door stoppers!
4. Wine Corks – If wine is part of your daily routine then collecting enough corks will only take a short time and these work really well too!
5. Wooden Blocks – Wooden blocks are not only durable but also look chic when used as decorative door stops.
6. Duct Tape – This versatile material can be used for almost anything including holding makeshift DIY doorstoppers together
Whether it’s old fabric scraps from your closet or spare bricks from outside, there are plenty of items that can be transformed into functional and stylish DIY door stoppers without breaking the bank!
Step-by-Step Instructions
Making your own DIY door stoppers is an easy and fun project that can be done inexpensively. Follow the simple step-by-step instructions below to create your very own custom-made door stopper!
First, gather all of the materials you will need. You will need a small bag of play sand, some fabric scraps (old towels or t-shirts work great), a funnel, and scissors.
Next, cut your fabric into two equal-sized pieces that are about 12 inches long by 6 inches wide. Place one piece on top of the other with the right sides facing each other.
Using your sewing machine, sew around three edges of the fabric leaving one short edge open for filling. Turn your “pillowcase” inside out so that the right sides are now facing outwards.
Insert your funnel into the opening and slowly pour in enough sand to fill up approximately half of the fabric pouch.
Once you have filled it halfway with sand, shake it gently to distribute it evenly throughout before pouring more sand until it is almost full but still has room for movement.
Fold over and sew shut the remaining open end using either a sewing machine or needle and thread.
Now you have created your very own DIY door stopper! Repeat these steps as often as needed depending on how many doors require stopping within your home or office space.
Tips and Tricks
As you can see, making your own DIY door stoppers is an easy and budget-friendly project that anyone can do. By following the step-by-step instructions we provided and using the materials suggested, you’ll be able to create stylish and functional door stoppers that will keep your doors from damaging walls or furniture.
Before wrapping up this article, here are some additional tips and tricks to help you make the most out of your DIY project:
– If you want a heavier door stopper, try filling a sock or stocking with rice instead of sand.
– Instead of painting your door stopper, wrap it in decorative washi tape for a colorful touch.
– Use old books as decoratively weighted door stops by simply placing them on the floor behind the door.
– Get creative with shapes! You don’t have to stick with traditional wedge-shaped designs – experiment with circles, triangles or even animal shapes.
Remember that creating DIY Door Stoppers isn’t just about saving money; it’s also about personalizing your home decor while being environmentally friendly. So grab those supplies and let’s get started!
